|
Regular Non-Serrated Blades (YELLOW)
The cutting tip of these blades is rounded on top and flat underneath. Designed to cut against the glass surface, leaving the urethane on the vehicle body.
The non serrated blades are also used for body moulding, badge & emblem removal in the bodyshop/dismantler environment
|
 |
 |
|
|
Regular Serrated Blades (YELLOW)
The cutting tip of these blades are rounded on top and flat underneath. Designed to cut against the glass surface, leaving the urethane on the vehicle body.
The non serrated blades are also used for body moulding, badge & emblem removal in the bodyshop/dismantler environment
|
 |
|
|
|
Reverse Grind Blades (ORANGE)
The cutting tip of these blades are a reverse grind of the yellow blades, being flat on top and rounded underneath with serrated edges. Designed for encapsulated glass removal, these blades will cut against the vehicle body, leaving the urethane on the glass while avoiding contact with encapsulation.
|
 |
 |
|
|
Safety Edge "V" blades (GREEN)
The cutting tip of these blades are a combination of the yellow and orange blades. The cutting edge is suspended away from each surface for cutting against softer material panels such as aluminium, fibreglass, polycarbonates or PVC or where panel may have high or low areas (panel joins, lap-overs or spot-welds).
|
 |
 |
|
|
Powered Cold Knife Blades
Designed to cut from outside the vehicle, these blades work just like a manual cold knife or pull knife, except the BTB tool does the work for you, rather than having the strain of pulling a blade through the urethane.
Available in regular grind (yellow) for regular glass or reverse grind (orange) for encapsulated glass removal
|
 |
|
| |
| |
|